Lister diesel parts gib key puller OE6241

lister diesel parts gib key puller OE6241 is the original part of lister diesel engines. lister diesel parts gib key puller OE6241 will works at the following rules:Thoroughly soak the key with a quality penetrating oil. Place the puller over the head of the key with the three 12mm bolt heads facing you(as shown in the picture) and rotate the puller slightly to the left(clockwise) so that the key head is no longer aligned with the cut out notch,but is immediately under the nearest 12mm bolt. you are now ready to apply pressure to the key head by winding in the three large bolts. you can place some packing steel between the three bolt ends and the hub of the flywheel to prevent marking.Be patient.It is important to keep the puller parallel to the flywheel at all times by applying an even pressure to the ky.An angled puller will apply uneven pressure to the key and increases the risk of shearing off the head.
If you have any interests of this product,welcome to contact us and send us your information.We would like any cooperations.